JOYO JDI48 48V phantom powered Dl box

SKU: JY-JDI48
MRP:
₹ 16,000
₹ 14,250
11% Off
(Inclusive of all taxes)
DI & Reamp Box

Stop Fighting Ground Hum. Start Sending Clean Signal.

The JOYO JDI-48 is for home recording musicians who need a clean, balanced signal into their interface without hum or noise, gigging bassists and guitarists who want one reliable box for stage and studio, and anyone building a reamping workflow who doesn't want to buy a separate reamp box. If ground loops, weak signal, or an extra box in your chain have been slowing you down, this is built to close that gap.

Best Feature

Two Independent Circuits, One Box

Most DI boxes only get your signal into the console. The JDI-48 also gets it back out — its 48V phantom-powered DI circuit and its passive REAMP circuit run independently of each other, so you can track and reamp without swapping gear. Add a ground lift, phase reverse, and a permalloy isolation transformer keeping distortion under 0.01%, and it's built to keep your signal clean at every step.

Country of Origin: China
More Information
- +
- +
Availability:
Price in points: 14250
Earn Reward Points: 143

Description

DI & Reamp, 2-in-1

JOYO JDI-48 48V Phantom Powered DI & Reamp Box

Send a clean, balanced signal to the console and send it right back to your amp — from the same box. The JDI-48 pairs an active, phantom-powered DI with a passive reamp path, so recording and live rigs both run through one rugged unit.

JOYO JDI-48 DI and Reamp box on a wooden studio table with guitar pedal and cables connected
2-in-1
DI + Reamp Box
48V
Phantom Powered
467g
Rugged Metal Chassis
6.35mm + XLR
Dual Input Jacks

Why You'll Love It

What the JDI-48 solves for you, beyond just "it's a DI box."

01

One Box, Two Jobs

DI and reamp functions live in the same unit with independent circuits, so you're not carrying two separate boxes for tracking and reamping.

02

No Battery Anxiety

The DI side runs entirely on 48V phantom power from your console or interface — no 9V battery to go dead mid-session.

03

Clean Signal, Fewer Ground Issues

A dedicated ground lift switch cuts hum and buzz caused by ground loops between your instrument and the console.

04

Shape The Tone Before It Hits Tape

Built-in low-cut filter, -15dB pad, and polarity/phase reverse give you control over the signal without reaching for a separate channel strip.

05

Reamp Without Extra Gear

Send a recorded DI track back out to a real amp for reamping, with its own independent input path — no need for a second dedicated reamp box.

06

Built To Survive The Signal Chain

A permalloy audio isolation transformer keeps distortion low and interference out, in a compact metal chassis built for the road.

Procraft Insight

Most buyers reach for the JDI-48 for one of two reasons: getting a clean, balanced instrument signal into a console without ground hum, or reamping a recorded DI track back through a real amp later — this box handles both from a single input pair.

Built by JOYO

JOYO designs affordable, gig-ready gear for guitarists and home studios — from pedals and amps to signal-chain tools that usually carry a much higher price tag.

The JDI-48 continues that mission: a DI and reamp box built to give home studios and gigging musicians the same clean-signal tools used on professional stages, without the professional-gear cost.

2
Independent Circuits
48V
Phantom Powered
1
Isolation Transformer
JOYO JDI-48 DI and Reamp box connected in a home studio signal chain

Engineered With Purpose

The thinking behind the circuit, the switches, and the dual input design.

  • 01

    Permalloy Isolation Transformer

    Converts your unbalanced instrument signal to a balanced output while keeping total harmonic distortion under 0.01% and rejecting outside interference.

  • 02

    Independent DI & REAMP Paths

    The DI circuit (48V phantom powered) and the REAMP circuit (no power needed) run independently, so using one doesn't tie up or affect the other.

  • 03

    Ground Lift & Polarity Reverse

    A grounding switch disconnects the internal ground channel between input and output to kill hum, alongside a dedicated polarity/phase reverse switch.

  • 04

    Dual-Format Input Jacks

    The REAMP input accepts both 6.35mm TRRS and XLR connections through a shared 2-in-1 jack, so it adapts to whatever cable is already on your board.

Close-up of the JOYO JDI-48 control panel showing ground lift, phase, and level switches

Specifications

Everything you need to know before it arrives.

DI Box Specifications
Power Type
48V DC phantom power
Input Impedance
220KΩ, unbalanced
Output Impedance
600Ω, balanced
Frequency Response
10Hz - 20,000Hz, <-0.5dBv
Total Harmonic Distortion
<0.01%
Phase Distortion
-21 degrees
Maximum Input Voltage
<9VPP
REAMP Specifications
Power Type
No power supply needed
Input Impedance
600Ω
Input Signal Level
+4dB Line level
Input Jack Type
6.35mm & XLR 2-in-1 (accepts 6.35mm TRRS and XLR)
General
Model
JOYO JDI-48
Weight
467g
Dimensions
146mm x 76mm x 34mm
In The Box
1 x JDI-48 DI & Reamp box, user manual

Compare Models

How the JDI-48 stacks up against a standard single-function DI box.

JOYO JDI-48
This Kit
Behringer Ultra-DI DI100
Function Active DI + passive Reamp, 2-in-1 Active DI only
Power Source 48V phantom power (DI side) Phantom power or 9V battery
Ground Lift Yes Yes
Polarity/Phase Reverse Yes No
Reamp Path Included Yes, independent circuit No — separate reamp box required
Input Jacks 6.35mm & XLR 2-in-1 (Reamp) 6.35mm TRS / XLR
Procraft Insight

The DI100 is a solid, no-frills active DI with the flexibility to run on battery when phantom power isn't available. The JDI-48 trades that battery option for a built-in reamp circuit and phase reverse switch — if reamping recorded tracks is part of your workflow, that's one less box to buy and carry.

Frequently Asked Questions

Answers to the questions we hear most about the JDI-48.

It's a two-in-one box that combines an active, 48V phantom-powered DI (Direct Injection) circuit with a passive REAMP circuit, letting you send a clean signal to a console and send a recorded track back out to an amp from the same unit.
No. The DI side runs entirely on 48V phantom power supplied by your mixing console, audio interface, or preamp — there's no battery compartment to manage.
Reamping sends a previously recorded DI signal back out through a real guitar amp and cabinet, so you can re-record the amp tone later without having to re-play the part. It's useful for trying different amps or mic setups after the take is already recorded.
Yes. The DI and REAMP circuits are independent of each other, so each one functions on its own without interfering with the other.
It disconnects the internal ground connection between the input and output, which helps eliminate the hum and buzz caused by ground loops between your instrument and the console.
Both. It's built for signal switching in professional recording and live performance settings alike, with a rugged metal chassis designed to handle regular transport and stage use.
The REAMP input jack is a 2-in-1 design that accepts both 6.35mm TRRS and XLR connections, so it works with whichever cable format you already have.
The -15dB attenuation pads down hot signals to prevent clipping, while the low-cut filter rolls off unwanted low-end rumble before the signal reaches your console.
It flips the signal's phase by 180 degrees, which helps when combining multiple mic'd or DI'd signals of the same source that would otherwise cancel each other out.
Yes. High input impedance on the DI side reduces loading on your pickups, and the REAMP path is rated for +4dB line level signals, covering both instrument and line-level sources.
Very little — total harmonic distortion on the DI circuit is rated below 0.01%, thanks to the permalloy audio isolation transformer inside.
Each order includes one JDI-48 DI & Reamp box and a user manual. See the Specifications section above for full details.

Buy With Confidence

Procraft stands behind every order.

1

Fast Dispatch

Orders are packed and shipped quickly from our warehouse.

2

1 year Warranty

Covered against manufacturing defects from the date of purchase.

3

Easy Returns

Not the right fit? Our return process is simple and hassle-free.

4

Real Support

Questions about setup or use? Reach our team at support@procraftindia.com

Accessories

Add additional accessories with your order 

Reviews


Login
Don't have an account?
Sign Up
×

Your Shopping Cart


Your shopping cart is empty.
Chat with us